Soo saaraha Qalabka Qodista Xirfadlayaasha

Khibrad Wax Soo Saar 25 Sano

15 1/2 inch Iadc 127/217 Milled Tricone Bits ee Samaynta Jilicsan

Sharaxaad Gaaban:

Warshadaha lagu dabaqi karo: Aasaaska, Macdanta, Qoditaanka Biyaha
Cabbirka: 15 1/2 inch 393.7 mm
Xidhiidhka dunta: 7 5/8 API REG PIN
koodka IDC: 117,127,217
WOB (Miisaan On Bit) 87.5 ~ 237.5KN
RPM (r/min) 150-60
Nooca: Qalab qodida, qalabaynta
Qalab: Birta Manganese Sare
Nooca Habaynta: Been abuurasho
Xidhmada: sanduuqa alwaax
Sameynta Awood cadaadis hooseeya, karti-jilicsan oo sarreeya iyo samaynta jilicsan, sida shale, dhoobo, dhagax ciid, dhagax nuurad jilicsan, dhagax milix ah, iwm.

  • Qiimaha FOB:US $0.5 - 9,999 / Qayb
  • Tirada Dalbashada Min.100 Qaybood/Qeyb
  • Awood-siinta:10000 Qeybaha/Qeybaha bishii
  • Faahfaahinta Alaabta

    Tags Product

    Faahfaahinta Alaabta

    ILKAHA BIrta-shiidka
    IADC 1 TAXANAHA Qoditaanka
    Qaybahaan waxaa loo isticmaalaa in lagu qodo xoog cadaadis hooseeya, qaabab jilicsan.Dhererka iligga saadaasha dheer ayaa loo adeegsadaa koollada sare ee la dhimay si loo bixiyo heerka ugu sarreeya ee suurtogalka ah.Waji adag oo u adkaysta xidhashada waxa loo isticmaalaa in lagu xakameeyo xidhashada iliga.Noocyada yaryar ee ugu jilicsan wajigan adag wuxuu si buuxda u daboolaa ilkaha qaniinyada ah.

    IADC 2 TAXANAHA Qoditaanka

    Qaybahaan waxaa loo isticmaalaa in lagu qodo xoog cadaadis sare leh, qaabab adag oo dhexdhexaad ah.Ilkaha saadaalinta gaagaaban ee dhererkoodu hoos u dhacay ayaa loo isticmaalaa nashqadahan taxanaha ah.Waji adag oo waara ayaa lagu dabaqaa si loo yareeyo daalashada iliga.
    IADC 3 TAXANAHA Qodista
    Qeexitaannadan waxaa loo isticmaalaa in lagu qodo qaabab adag oo xoqan.Ilkaha aadka u gaaban oo aad u kala fog oo leh xaddi adag oo adag ayaa loo isticmaalaa iska caabinta jabinta.Qeexitaannadani waa inay u adkeystaan ​​culeysyo sarreeya oo ay qodaan qaabab xoqan oo leh ficil burburin, gooyn.
    birta-ilkaha-tricone-bits

    Shaxda kala soocida adkaanta samaynta iyo doorashada yara

    Qulqulka koontada IDC code ee xoogaa dheeman ah Sharaxaad samaynta Nooca dhagaxa Xoog cadaadis leh
    (Mpa)
    ROP (m/saac)
    IDC code
    111/124 M/S112~M/S223 Aad u jilicsan: samaynta jilicsan ee dhegdheg leh oo leh xoog cadaadis hooseeya. dhoobo
    Siltstone
    dhagax ciid
    <25 >20
    116/137 M/S222~M/S323 Jilicsan: qaab-dhismeed jilicsan oo leh xoog cadaadis hooseeya iyo karti-jilicsi sare. Dhagax dhoobo
    Marl
    Lignite
    dhagax ciid
    25 ~ 50 10 ~ 20
    417/527 M/S323~M/S433 Jilicsan dhexdhexaad ah: samaynta jilicsan ama dhexdhexaad ah oo leh xoog cadaadis hoose iyo steak. Dhagax dhoobo
    Marl
    Lignite
    Dhagax ciid
    Siltstone
    Anhydrite
    Tuff
    50 ~ 75 5 ~ 15
    517/537 M322~M443 Dhex dhexaad ilaa mid adag oo leh xoog cadaadis sare leh iyo xariijimo khafiif ah oo khafiif ah. Dhagax dhoobo ah
    Dhagax madow
    shaale
    75-100 2 ~ 6
    537/617 M422~M444 Dhexdhexaad adag: samayn adag oo cufan leh xoog cadaadis sare leh iyo xoqid dhexdhexaad ah. Dhagax madow
    Shale adag
    Anhydrite
    Dhagax ciid
    Dolomite
    100-200 1.5 ~ 3

    milled-tricone-bit

    Xajmiga Birta Ilkaha ee Tricone

    Cabbirrada Joogtada ah
    IDC joogto ah
    API Reg Pin
    Isqurxinta Torque (Nm)
    3 7/8" (98.4mm)
    126/216/637
    2 3/8
    4100 ~ 4700
    4 5/8" (117.4mm)
    126/216/517/537/637
    2 7/8
    6100-7500
    5 1/4" (133.3mm)
    126/216/517/537/637
    3 1/2
    9500-12200
    5 5/8" (142.8mm)
    126/216/517/537/637
    3 1/2
    9500-12200
    5 7/8" (149.2mm)
    126/216/517/537/637
    3 1/2
    9500-12200
    6 "(152.4mm)
    126/127/216/517/537/617/637
    3 1/2
    9500-12200
    6 1/4" (158.7mm)
    126/127/216/517/537/617/637
    3 1/2
    9500-12200
    6 1/2" (165mm)
    126/127/216/517/537/617/637
    3 1/2
    9500-12200
    7 1/2" (190mm)
    126/216/517/537
    4 1/2
    16300-21700
    7 5/8" (193mm)
    126/216/517/537
    4 1/2
    16300-21700
    7 7/8" (200mm)
    126/216/517/537
    4 1/2
    16300-21700
    8 1/2 "(215.9mm)
    117/127/217/437/517/537/617/637
    4 1/2
    16300-21700
    9 1/2 "(241.3mm)
    117/127/217/437/517/537/617/637
    6 5/8
    38000-43400
    9 7/8" (250.8mm)
    117/127/217/437/517/537/617/637
    6 5/8
    38000-43400
    10 5/8 (269.8mm)
    117/127/137/217/517/537/617/637
    6 5/8
    38000-43400
    11 5/8 (295.3mm)
    117/127/137/217/517/537/617/637
    6 5/8
    38000-43400
    12 1/4" (311.1mm)
    114/127/217/437/517/537/617/637
    6 5/8
    38000-43400
    13 5/8" (346.0mm)
    127/217/517/537/617/637
    6 5/8
    38000-43400
    14 3/4" (374.6mm)
    127/217/517/537/617/637
    7 5/8
    46100~54200
    17 1/2 "(444.5mm)
    114/115/125/215/515/535/615/635
    7 5/8
    46100~54200
    26"(660.4mm)
    114/115/125/215/515/535/615
    7 5/8
    46100~54200

    Xusuus-qorka isticmaalka qaniinyada koontada roller:

    1 .Inta aan godka la qodin, waxaa lagama maarmaan ah in la xaqiijiyo in gunta ceelku nadiif yahay, oo aan qashin lahayn, birtuna aanay ku dhicin.

    2. Hubi in furka isku xirka dunta ee birta koontada rullaluistu ay taam tahay iyo in sanka si fiican loo rakibay.

    3. Orodka godku wuxuu u baahan yahay inuu ahaado mid xasiloon, ka fogow diiqada iyo ka hortagga qodista.

    4. Laabka ugu dambeeya wuxuu u baahan yahay baro-kac weyn si loo bilaabo miiska wareegga oo ay sii wadaan inay ku sii socdaan ceelka guntiisa., si buuxda u maydh ceelka si aad uga ilaaliso qashinka in ay xidhaan tuubada.

    5. Qaabka daloolka hoose waa in si khafiif ah loo cadaadiyo oo si tartiib tartiib ah loogu beddelaa xiriirka hoose ee ceelka, cadaadiska yar yar, xawaaraha hooseeya, barokaca weyn, qulqul yar, iyo xawaaruhu waa 40 ~ 60 rev / min, ugu yaraan 30 daqiiqado.

    6. Go'aami culeyska xoogaa iyo xawaare iyadoo lagu darayo xaaladaha dhabta ah ee sameynta.

    7. Inta lagu jiro qodista ka hor, hawl-galku waa inuu ahaadaa mid siman, quudinta daloolku waa inay noqotaa mid lebbisan, si adagna waa mamnuuc in kor loo qaado oo si adag loo sii daayo, xadhigga qodista oo aan si fiican bareega u xidhin, xadhiga daloolna si xor ah u dhaco.

    8. Haddii la ogaado in daloolintu joojiso horumarka, cadaadiska bamka ayaa kor u kacaya oo hoos u dhacaya si cad, heerka dhexgalka ayaa si lama filaan ah hoos u dhacaya, iyo qulqulka korodhka, kor u qaad si aad u hubiso daahid la'aan.

    tricone-bit

    Shuruudaha Ganacsiga ee Alaabta

    Tirada Dalbashada Ugu Yar N/A
    Qiimo
    Faahfaahinta Baakadaha Xidhmada Dhoofinta caadiga ah
    Waqtiga dirida 7 maalmood
    Shuruudaha Lacag-bixinta T/T
    Awood-siinta Iyada oo ku saleysan Amarka Faahfaahin

  • Hore:
  • Xiga: