Soo saaraha Qalabka Qodista Xirfadlayaasha

Khibrad Wax Soo Saar 25 Sano

5 1/2 inch Iadc 537 Tci Tricone Drilling Rock Bit ee Samaynta Adag Dhexdhexaad ah

5 1/2 Inch Iadc 537 Tci Tricone Drilling Rock Bit Loogu talagalay Samaynta Adag Dhexdhexaad ah Sawirka
  • 5 1/2 inch Iadc 537 Tci Tricone Drilling Rock Bit ee Samaynta Adag Dhexdhexaad ah
  • 5 1/2 inch Iadc 537 Tci Tricone Drilling Rock Bit ee Samaynta Adag Dhexdhexaad ah
  • 5 1/2 inch Iadc 537 Tci Tricone Drilling Rock Bit ee Samaynta Adag Dhexdhexaad ah
  • 5 1/2 inch Iadc 537 Tci Tricone Drilling Rock Bit ee Samaynta Adag Dhexdhexaad ah

Sharaxaad Gaaban:

Warshadaha lagu dabaqi karo Hawlaha dhismaha , Tamarta & Macdanta
Cabbirka 5 1/2 ", 140mm
Dulqaad API 3 1/2 ” REG
Miisaanka (KG): 15
Nooca Mashiinka Qalabka qodista
Shahaado ISO
Qalab Birta Manganese Sare
Nooca Habaynta Been abuurasho
Isticmaal Ceel qodid
Magaca alaabta Qoto qod
Codsiga Dhismaha
Baakad Sanduuq alwaax ah oo bilaash ah qiiqa

  • Qiimaha FOB:US $0.5 - 9,999 / Qayb
  • Tirada Dalbashada Min.100 Qaybood/Qeyb
  • Awood-siinta:10000 Qeybaha/Qeybaha bishii

    • Faahfaahinta Alaabta

    Tags Product

    Faahfaahinta Alaabta

    Horudhaca Tricone bits

    TCI Tricone waxay qodaysaa qodista samaynta dhagxaanta dhexdhexaadka ah iyo kuwa adag.

    Samaynta dhexdhexaadka ah ee TCI tricone bits waxay ka kooban tahay dhejisyo tungsten carbide ah oo gardarro leh oo la gelinayo safafka cidhibta iyo safafka gudaha.Naqshadani waxay bixisaa heerka qodista degdega ah iyo ku darista adkaysiga qaab dhismeedka goynta ee qaababka adag ee dhexdhexaadka ah.Ring-ga caagga ah ee HSN waxa uu bixiyaa xidhid ku filan oo adkeysiga.

    Samaynta adag ee TCI tricone bits waxaa loo isticmaali karaa in lagu qodo samaynta adag iyo abrasive.Xiro caabbinta tungsten kaarbiide waxa loo isticmaalaa safafka dibadda si looga hortago luminta xoogaa cabbirka.Tirooyinka ugu badan ee gashanaya qaab hemispherical ayaa loo isticmaalaa dhammaan safafka si loo bixiyo cimri dherer iyo cimri dheer.

    Ilkaha milicsan ee Tricone Rock Drill Bits:

    Iliga la shiiday (Ilig bir ah) tricone bits qodista si ay u samaysmaan dhagax jilicsan ama dhexdhexaad ah.

    Samaynta jilicsan ee la shiiday tricone-bits waxaa loo isticmaalaa in lagu qodo xoog cadaadis hooseeya, sameysid jilicsan.Dhererka iliga saadaasha dheer ayaa lagu isticmaalaa koollada sare ee la geliyo si loo bixiyo heerka gelitaanka ugu weyn ee suurtogalka ah.Xiro iska caabin adag oo weji adag ayaa loo isticmaalaa in lagu xakameeyo daalashada iliga.Noocyada yaryar ee ugu jilicsan wajigan adag wuxuu si buuxda u daboolaa ilkaha qaniinyada ah.

    Samaynta dhexdhexaadka ah ee la shiiday qaniinyada tricone-ga waxaa loo isticmaalaa in lagu qodo xoog cadaadis sare leh, samaynta dhagax dhexdhexaad ah.Ilkaha saadaalinta toogashada oo dhererkoodu hoos u dhacay ayaa loo adeegsaday naqshadahan taxan.Weji adag ayaa lagu dabaqaa si loo yareeyo daalashada iliga.

    tricone-bits-codsiga

    Astaamaha

    Jilicsan dhexdhexaad ah oo leh xoog cadaadis hooseeya iyo xargaha xoqan adag, sida shale adag, gypsolyte adag, dhagax nuurad jilicsan, dhagax ciid iyo dolomite oo leh xargaha, iwm.

    Isafgaradka isafgaradka ee safka gudaha ah, isafgaradka safka dibadda ah, habayn meel bannaan oo aan la qiyaasi karin, iyo saf gooyo ah ayaa lagu daraa inta u dhaxaysa safka gage iyo safka ciribta.

    TRICONE-BITS-FAA'IDO

    TCI-Tricone-bits-si-fiican-qodista

    Hagida Tricone Bit Choice

    IDC WOB (KN/mm) RPM (r/min) QAABYADA LOOGU TALAGALAY
    114/116/117 0.3 ~ 0.75 180 ~ 60 Qaabab aad u jilicsan oo leh awood cadaadis hoose iyo daloolin sare, sida dhoobo, dhagax dhoobo, tamaashiir, iwm.
    124/126/127 0.3 ~ 0.85 180 ~ 60 Qaababka jilicsan oo leh awood cadaadis hooseeya iyo daloolin sare, sida dhagax dhoobo ah, gypsum, milix, dhagax nuurad jilicsan, iwm.
    134/135/136/137 0.3 ~ 0.95 150 ~ 60 Qaababka jilicsan iyo kuwa dhexdhexaadka ah oo leh awood cufan oo hooseeya iyo digtoonaan sare, sida shale jilicsan dhexdhexaad ah, gypsum adag, nuurad jilicsan dhexdhexaad ah, ciid dhexdhexaad ah oo jilicsan, jilicsanaan jilicsan oo adag oo isku dhafan, iwm.
    214/215/216/217 0.35 ~ 0.95 150 ~ 60 Qaababka dhexdhexaadka ah oo leh xoog cadaadis sare leh, sida shale jilicsan dhexdhexaad ah, gypsum adag, nuurad jilicsan dhexdhexaad ah, dhagax ciid dhexdhexaad ah oo jilicsan, jilicsanaan jilicsan oo adag oo isku dhafan, iwm.
    227 0.35 ~ 0.95 150-50 Qaababka adag ee dhexdhexaadka ah oo leh xoog cadaadis sare leh, sida shale abrasive, limestone, sandstone, dolomite, gypsum adag, marmar, iwm.
    Fiiro gaar ah: Xadka sare ee WOB iyo RPM ee shaxda sare waa inaan isku mar la isticmaalin.

    Hagidda doorashada tricone BitsNooca Ilkaha ee Tricone
    Walax aad u fiican 3 7/8 Tricone Bit Roller Cone si fiican u qodida birta Roller Cones Cutter Bit

    Cabbirka Bits

    Cabbirka Bit API REG PIN Torque Miisaanka
    Inji mm Inji KN.M Kgs
    3 3/8 85.7 2 3/8 4.1-4.7 4.0-6.0
    3 1/2 88.9 4.2-6.2
    3 7/8 98.4 4.8-6.8
    4 1/4 108 5.0-7.5
    4 1/2 114.3 5.4-8.0
    4 5/8 117.5 2 7/8 6.1-7.5 7.5-8.0
    4 3/4 120.7 7.5-8.0
    5 1/8 130.2 3 1/2 9.5-12.2 10.3-11.5
    5 1/4 133.4 10.7-12.0
    5 5/8 142.9 12.6-13.5
    5 7/8 149.2 13.2-13.5
    6 152.4 13.6-14.5
    6 1/8 155.6 14.0-15.0
    6 1/4 158.8 14.4-18.0
    6 1/2 165.1 14.5-20.0
    6 3/4 171.5 20.0-22.0
    7 1/2 190.5 4 1/2 16.3-21.7 28.0-32.0
    7 5/8 193.7 32.3-34.0
    7 7/8 200 33.2-35.0
    8 3/8 212.7 38.5-41.5
    8 1/2 215.9 39.0-42.0
    8 5/8 219.1 40.5-42.5
    8 3/4 222.3 40.8-43.0
    9 1/2 241.3 6 5/8 38-43.4 61.5-64.0
    9 5/8 244.5 61.8-65.0
    9 7/8 250.8 62.0-67.0
    10 254 68.0-75.0
    10 1/2 266.7 72.0-80.0
    10 5/8 269.9 72.0-80.0
    11 1/2 292.1 79.0-90.0
    11 5/8 295.3 79.0-90.0
    12 1/4 311.2 95.0-102.
    12 3/8 314.3 95.0-102.2
    12 1/2 317.5 96.0-103.0
    13 1/2 342.9 105.0-134.0
    13 5/8 346.1 108.0-137.0
    14 3/4 374.7 7 5/8 46.1-54.2 140.0-160.0
    15 381 145.0-165.0
    15 1/2 393.7 160.0-180.0
    16 406.4 200.0-220.0
    17 1/2 444.5 260.0-280.0
    26 660.4 725.0-780.0

    Habka wax soo saarka

    Tricone-bits-production-process

    Tilmaamaha Alaabta

    Hordhac

    5 1/2 inch Water Well Roller Cone Bit 114mm Birta Ilkaha Tricone Bit

    The tricone drill bit waa ugu caansan ee qodista dunidu, waxaa si weyn loo isticmaali karaa Saliidda & Gaaska qodista, Macdanta, Ceelka Biyaha, Geological Exploration.

    1. C-Center jet waxay ka fogaan kartaa samaynta kubbadda in yar, waxay baabi'isaa aagga dareeraha ee gunta ceelka, waxay kordhisaa socodka kor u kaca ee gooyn qodista waxayna hagaajisaa ROP.

    2. Saturation sare ee NBR-da waxay yareyn kartaa cadaadiska xirida waxayna wanaajisaa kalsoonida xiritaanka.

    3. Ilaalinta G-Gauge waxay wanaajisaa awoodda cabbirka waxayna kordhisaa nolosha adeegga xoogaa.

    4. Ku darida saf ilko inta u dhaxaysa tuubada dambe iyo qulqulka si loo gooyo ceelka oo loo ilaaliyo koofiyadda.

    Shuruudaha Ganacsiga ee Alaabta

    Tirada Dalbashada Ugu Yar N/A
    Qiimo
    Faahfaahinta Baakadaha Xidhmada Dhoofinta caadiga ah
    Waqtiga dirida 7 maalmood
    Shuruudaha Lacag-bixinta T/T
    Awood-siinta Iyada oo ku saleysan Amarka Faahfaahin
  • Hore:
  • Xiga:

    • Alaabooyinka LA XIRIIRA