Faa'iidada
1. Saamaynta caabbinta ilkaha waa la wanaajiyaa waxaana la dhimaa heerka jabinta iliga iyadoo la qaadanayo xoogga sare iyo adkaanta ilkaha karbide ee sibidhka;
2. Naqshadaynta la wanaajiyey ee lambarka safka iligga, lambarka iliga, dhererka iliga oo qaawan iyo qaabka iliga daawaha gaarka ah ayaa si buuxda u siinaya awoodda goynta iyo jarista xawaaraha yar;
3. Xirmooyinka kootada rollerka ee lagu quful wareegyo waxay qaadi karaan cadaadis sare oo qodista;
4. Daawaha ka-hortagga is-jiidhka waxaa lagu dhejiyay godka gudaha ee qashin-qubka si loo hagaajiyo awoodda ka-hortagga xannibaadda ee xajinta;
5. Isku-xidhka xidhidhiyaha la hagaajiyay ee O-ring ee NBR waxay wanaajisaa isku halaynta xirashada;
6. Dhammaan bacda kaydinta saliidda caagga ah kaas oo xaddidi kara farqiga cadaadiska iyo ka hortagga dareeraha qodista ee soo galaya nidaamka sifeynta ayaa loo qaataa si loo bixiyo sifeynta wanaagsan ee nidaamka xajinta, iyo hubinta hawlgalka caadiga ah ee giraanta "O" iyo hagaajinta nolosha shaqada qaniinyada rullaluistemadka;
7. Dufanka cusub ee leh caabbinta heerkulka sare iyo xirashada hooseeya ayaa loo qaataa si loo hagaajiyo caabbinta heerkulka sare ee nidaamka sifeynta xirmada ee qashin-qubka.
Sidee aad naftaada u doorataa xoogaa tricone sax ah?
Samaynta jilicsan ee TCI tricone bits
Samaynta jilicsan ee TCI tricone bits waxaa loo isticmaalaa in lagu qodo xoog cadaadis hooseeya, qaabab aad u jilicsan.Waxoogaa waxa la kordhiyey in la isticmaalo labada koone iyo tungsten carbide dhexroorka iyo saadaasha sare labadaba.Naqshadeynta qaab dhismeedkan goynta, oo ay weheliso kabitaanka kolaydhka ugu badan, waxay keenaysaa heerar sare oo xoogaa ah.Dhexdhexaadinta qoto dheer ee safafka gooyuhu waxay ka hortagtaa damiinashada qaabab dhegdheg leh.
Samaynta dhexdhexaadka ah ee TCI tricone bits
Samaynta dhexdhexaadka ah ee TCI tricone bits waxay ka kooban tahay dhejisyo tungsten carbide ah oo gardarro leh oo la gelinayo safafka cidhibta iyo safafka gudaha.Naqshadani waxay bixisaa heerka qodista degdega ah iyo ku darista adkaysiga qaab dhismeedka goynta ee dhexdhexaadka ah iyo dhexdhexaadka adag ee mation.Ring-ga caagga ah ee HSN waxa uu bixiyaa xidhid ku filan oo adkeysiga.
Samaynta adag ee TCI tricone bits
Samaynta adag ee TCI tricone bits waxaa loo isticmaali karaa in lagu qodo qaabab adag oo xoqan.Xiro caabbinta tungsten kaarbiide waxa loo isticmaalaa safafka dibadda si looga hortago luminta xoogaa cabbirka.Tirooyinka ugu badan ee gashanaya qaab hemispherical ayaa loo isticmaalaa dhammaan safafka si loo bixiyo cimri dherer iyo cimri dheer.
Tricone bits Qaab dhismeedka
Hagida Tricone Bit Choice
| ROLLER CONE BITS(IADC) | ROLER COONE(m/saacaddii) | DHISMAHA ADAGGA | DHISMAHA | NOOCA DHAGAX | XOOGGA CUSBOONAYSI | |
| WEM | OBM | |||||
| 111/124 | 15-30 | 18-33 | Aad u jilicsan | Samaynta jilicsan oo leh lakabyo dhejis ah iyo xoog cadaadis leh oo lom ah | dhoobo, silts, ciid | <25MPa |
| 116/137/437 | 9-15 | 12-18 | Jilicsan | Samaynta jilicsan oo leh xoog cufan oo lom ah iyo daloolin sare | Claystone,Marl,Lignite,Sandstone,Tuff | 25-50MPa |
| 136/137/517/527 | 4.5-9 | 6-12 | Jilicsan dhexdhexaad ah | Samaynta jilicsan ama dhexdhexaad ah oo leh xoog cadaadis leh oo isku dhafan oo leh lakabyo adag | Claystone, Marl, Lignite, Sandstone, Silts, Anhydrites, Tuff | 50-75MPa |
| 211/217/517/537 | 2.5-6 | 3-6 | Dhexdhexaad | Dhexdhexaad ilaa mid adag oo leh awood cadaadis sare leh iyo lakabyo yaryar oo xoqan | Dhagaxa dhagaxa limestone anhydrite (Calcareous) | 75-100MPa |
| 211/236/537/617 | 1.5-2.5 | 1.5-3 | Dhexdhexaad Adag | Samaynta adag oo cufan leh oo leh xoog cadaadis aad u sarreeya laakiin aan xoqin | Limestone, Anhydrite, Dolomite | 100-120MPa |
| 311/347/627/637 | 1-1.5 | 1-1.5 | Adag | Samaynta adag oo cufan oo leh xoog cadaadis aad u sarreeya oo leh lakabyo xoqan | Shale (Kalcareous), Dhagax ciid ah (Siliceous), Dhagaxa Siltstone | 100-200MPa |
| 637/737/837 | 1 | 1 | Aad u Adag | Qaabab aad u adag oo xoqan | Quartzite, dhagaxyada Igneous | > 200MPa |
Hagidda doorashada tricone BitsNooca Ilkaha ee Tricone
Cabbirka Bits
| Cabbirka Bit | API REG PIN | Torque | Miisaanka | |
| Inji | mm | Inji | KN.M | Kgs |
| 3 3/8 | 85.7 | 2 3/8 | 4.1-4.7 | 4.0-6.0 |
| 3 1/2 | 88.9 | 4.2-6.2 | ||
| 3 7/8 | 98.4 | 4.8-6.8 | ||
| 4 1/4 | 108 | 5.0-7.5 | ||
| 4 1/2 | 114.3 | 5.4-8.0 | ||
| 4 5/8 | 117.5 | 2 7/8 | 6.1-7.5 | 7.5-8.0 |
| 4 3/4 | 120.7 | 7.5-8.0 | ||
| 5 1/8 | 130.2 | 3 1/2 | 9.5-12.2 | 10.3-11.5 |
| 5 1/4 | 133.4 | 10.7-12.0 | ||
| 5 5/8 | 142.9 | 12.6-13.5 | ||
| 5 7/8 | 149.2 | 13.2-13.5 | ||
| 6 | 152.4 | 13.6-14.5 | ||
| 6 1/8 | 155.6 | 14.0-15.0 | ||
| 6 1/4 | 158.8 | 14.4-18.0 | ||
| 6 1/2 | 165.1 | 14.5-20.0 | ||
| 6 3/4 | 171.5 | 20.0-22.0 | ||
| 7 1/2 | 190.5 | 4 1/2 | 16.3-21.7 | 28.0-32.0 |
| 7 5/8 | 193.7 | 32.3-34.0 | ||
| 7 7/8 | 200 | 33.2-35.0 | ||
| 8 3/8 | 212.7 | 38.5-41.5 | ||
| 8 1/2 | 215.9 | 39.0-42.0 | ||
| 8 5/8 | 219.1 | 40.5-42.5 | ||
| 8 3/4 | 222.3 | 40.8-43.0 | ||
| 9 1/2 | 241.3 | 6 5/8 | 38-43.4 | 61.5-64.0 |
| 9 5/8 | 244.5 | 61.8-65.0 | ||
| 9 7/8 | 250.8 | 62.0-67.0 | ||
| 10 | 254 | 68.0-75.0 | ||
| 10 1/2 | 266.7 | 72.0-80.0 | ||
| 10 5/8 | 269.9 | 72.0-80.0 | ||
| 11 1/2 | 292.1 | 79.0-90.0 | ||
| 11 5/8 | 295.3 | 79.0-90.0 | ||
| 12 1/4 | 311.2 | 95.0-102. | ||
| 12 3/8 | 314.3 | 95.0-102.2 | ||
| 12 1/2 | 317.5 | 96.0-103.0 | ||
| 13 1/2 | 342.9 | 105.0-134.0 | ||
| 13 5/8 | 346.1 | 108.0-137.0 | ||
| 14 3/4 | 374.7 | 7 5/8 | 46.1-54.2 | 140.0-160.0 |
| 15 | 381 | 145.0-165.0 | ||
| 15 1/2 | 393.7 | 160.0-180.0 | ||
| 16 | 406.4 | 200.0-220.0 | ||
| 17 1/2 | 444.5 | 260.0-280.0 | ||
| 26 | 660.4 | 725.0-780.0 | ||
Alaabooyinka La Xiriira
| Tirada Dalbashada Ugu Yar | N/A |
| Qiimo | |
| Faahfaahinta Baakadaha | Xidhmada Dhoofinta caadiga ah |
| Waqtiga dirida | 7 maalmood |
| Shuruudaha Lacag-bixinta | T/T |
| Awood-siinta | Iyada oo ku saleysan Amarka Faahfaahin |
